IB-C160-AIR

The IB-C160-Air slit system has primarily found application within the neutron community. This extensive 28 kg slit system uses the same concepts as the other IB-slits but is reinforced to handle the significantly larger and heavier blades.

The standard blade materials are B4C or tungsten carbide. Other blades can be accommodated by JJ X-Ray or the customer.

Show more
Categories: ,

Technical specifications

Aperture size
Maximum: 160 mm x 160 mm
Minimum: Full overlap

Resolution
1 micron per full step

Repeatability
< 2 micron

Accuracy
± 10 microns over the full range
± 1 micron or better with encoders

Limit switches (end-of-travel)
Included as standard on all motions

Guiding
High precision internal rails and carriages

Electrical connections
Limit switches coupled to 2 motor connectors (SUB-D 15 pins male)

Motors
2-phase stepping motors

Mechanical dimensions
560 mm x 560 mm x 78 mm (without extensions)
500 mm x 500 mm x 78 mm (housing only)

Mechanical connections
M6-threaded holes are on the sides, as shown in the drawing.

Weight
≈ 28.0 kg

Outer surface
Anodized aluminum in color nature

Common options
Blades: Various blade shapes and materials
Motors: Custom high-resolution stepping, including IMS motors
Encoders: Back-axle rotary encoders or internal Renishaw linear encoders (absolute or incremental)
Non-magnetic guides and lead screws and extension of motor housings for large distance
Custom connectors