IB-C50-HV

IB-C50-HV features a 50 mm x 50 mm aperture, a slit housing compatible with vacuum application (10-5 mbar), and is large enough to house internal linear encoders.

Please notice: Standard flange connections are DN100LF on both sides (flange connection in the picture is not standard)

For more details, please contact us.

Show more
Category:

Technical specifications

Aperture size
Maximum: 50 mm x 50 mm
Minimum: Full overlap

Resolution
1 micron per full step

Repeatability
<2 micron

Accuracy
± 10 microns over the full range
± 1 micron or better with encoders

Vacuum
O-ring sealed, high vacuum 10-5 mbar, low outgassing materials

Limit switches (end-of-travel)
Included as standard on all motions

Guiding
High precision internal rails and carriages

Electrical connections
Limit switches coupled to 2 motor connectors (SUB-D 15 pins male)

Motors
2-phase stepping motors

Mechanical dimensions
262 mm x 262 mm x 75 mm
200 mm x 200 mm x 75 mm (housing only)

Outer surface
Anodized aluminum in color nature

Common options
Blades: Various blade shapes and materials
Motors: Custom high-resolution stepping, including IMS motors
Encoders: Back-axle rotary encoders (absolute or incremental)
Adaptors: Other KF(NW) flanges or CF flanges
Special preparation for enabling vacuum <10-6 mbar
Internal wiring of Kapton or wiring with Teflon insulation
Custom connectors