Technical drawings
JJ X-ray Products
Explore our innovative products and technologies
JJ X-ray offers a wide range of spectacular and efficient components and solutions, where cutting-edge technology meets precision. Elevate your research with our advanced solutions, designed to unlock new possibilities in scientific discovery. Welcome to the forefront of innovation.
Search products
IB-C50-AIR for vacuum
IB-C50-AIR for UHV is a modified version of our standard slits. All parts and surfaces are suited for UHV operation (including microswitches, motors, wiring, connectors, guides, and encoders).
The IB-C50-AIR is a compact system but still spacious enough to house internal linear encoders (option). Our smallest system with this capability. Except for the additional space for internal encoders, the design is very similar to our classic IB-C30-AIR slit system: The aperture is defined by four independently movable highly polished tungsten carbide blades. The blades are, in turn, controlled by a high-precision guiding rail system and high-resolution stepping motors.
The slit can be provided with our standard 2 mm blades with a knife-edge slope at 0.5 degrees. with an RMS roughness better than 25 nm. Other blade types, including natural B4C, can be provided as well.
Without internal encoders, it is possible to reduce width in beam direction with 24 mm (2 mm blades).
In addition to UHV operation (10E-9 mbar), the IB-C50-AIR can also be provided in an HV-version (down to 10E-7 ). This is mainly defined by choice of motor type, guides and microswitches.
Categories:
Technical Specifications
Aperture size
Maximum: 50 mm x 50 mm
Minimum: Full overlap
Resolution
2 micron per full step
Accuracy
± 5 micron over full range
Standard blades
2 mm thick tungsten carbide blades which can be mounted either with a 0.5 degrees knife-edge or a R16 radius edge
Limit switches (end-of-travel)
Included as standard on all motions
Guiding
High precision internal rails and carriages
Electrical connections
Limit switches coupled to 2 motor connectors (SUB-D 15 pins male, PEEK)
Motors
2-phase stepping UHV motors
Mechanical dimensions
278 mm x 278 mm x 96 mm
194 mm x 194 mm x 96 mm (housing only)
Mechanical connections
M6-threaded holes on the sides as shown on the drawing.
Weight
≈ 4.5 kg
Outer surface
Anodized aluminum in color nature
More UHV details
UHV rated stepper motors (200 steps per rev.), microswitches, guides and carriages.
Kapton wire and PEEK connectors
Encoder option: Internal linear encoders for UHV (absolute or incremental)
